刚刚DD的debian10安装宝塔aapanel报错

Sails

之前debian10安装aapanel都没啥问题，现在安装就报错了，想好好的用个宝塔国际版也不行了，有大佬知道怎么解决吗，没宝塔社区帐号，也懒得去那里问。

机器是热乎的甲骨文新加坡 ARM

参考楼下大佬的意见，更换了DNS，update了下，更换了软件源，apt update && apt upgrade 后一样的报错，还是不行。

感谢各位大佬的帮助，按照13楼大佬的方法面板是正常安装上了，
但登录面板后弹出错误
点击修复面板一下就OK了

1.   ERROR: Command errored out with exit status 1:
   
2.    command: /www/server/panel/pyenv/bin/python3.7 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-46ogry48/pycryptodome_0bee875c30564a2e8268e2f00743e17e/setup.py'"'"'; __file__='"'"'/tmp/pip-install-46ogry48/pycryptodome_0bee875c30564a2e8268e2f00743e17e/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-06zarbh1
   
3.        cwd: /tmp/pip-install-46ogry48/pycryptodome_0bee875c30564a2e8268e2f00743e17e/
   
4.   Complete output (57 lines):
   
5.   Testing support for clang
   
6.   Target does not support clang
   
7.   Testing support for gcc
   
8.   Target does support gcc
   
9.   Testing support for stdint.h header
   
10.   Target does support stdint.h header
    
11.   Testing support for 128-bit integer
    
12.   Target does support 128-bit integer
    
13.   Testing support for cpuid.h header
    
14.   Target does not support cpuid.h header
    
15.   Testing support for intrin.h header
    
16.   Target does not support intrin.h header
    
17.   Testing support for posix_memalign
    
18.   Target does support posix_memalign
    
19.   Testing support for SSE2(intrin.h)
    
20.   Target does not support SSE2(intrin.h)
    
21.   Testing support for SSE2(x86intrin.h)
    
22.   Target does not support SSE2(x86intrin.h)
    
23.   Testing support for SSE2(emmintrin.h)
    
24.   Target does not support SSE2(emmintrin.h)
    
25.   Warning: compiler does not support AESNI instructions
    
26.   Warning: compiler does not support CLMUL instructions
    
27.   running egg_info
    
28.   creating /tmp/pip-pip-egg-info-06zarbh1/pycryptodome.egg-info
    
29.   writing /tmp/pip-pip-egg-info-06zarbh1/pycryptodome.egg-info/PKG-INFO
    
30.   writing dependency_links to /tmp/pip-pip-egg-info-06zarbh1/pycryptodome.egg-info/dependency_links.txt
    
31.   writing top-level names to /tmp/pip-pip-egg-info-06zarbh1/pycryptodome.egg-info/top_level.txt
    
32.   writing manifest file '/tmp/pip-pip-egg-info-06zarbh1/pycryptodome.egg-info/SOURCES.txt'
    
33.   Traceback (most recent call last):
    
34.     File "<string>", line 1, in <module>
    
35.     File "/tmp/pip-install-46ogry48/pycryptodome_0bee875c30564a2e8268e2f00743e17e/setup.py", line 505, in <module>
    
36.       ext_modules=ext_modules,
    
37.     File "/www/server/panel/pyenv/lib/python3.7/site-packages/setuptools/__init__.py", line 159, in setup
    
38.       return distutils.core.setup(**attrs)
    
39.     File "/www/server/panel/pyenv/lib/python3.7/distutils/core.py", line 148, in setup
    
40.       dist.run_commands()
    
41.     File "/www/server/panel/pyenv/lib/python3.7/distutils/dist.py", line 966, in run_commands
    
42.       self.run_command(cmd)
    
43.     File "/www/server/panel/pyenv/lib/python3.7/distutils/dist.py", line 985, in run_command
    
44.       cmd_obj.run()
    
45.     File "/www/server/panel/pyenv/lib/python3.7/site-packages/setuptools/command/egg_info.py", line 299, in run
    
46.       self.find_sources()
    
47.     File "/www/server/panel/pyenv/lib/python3.7/site-packages/setuptools/command/egg_info.py", line 306, in find_sources
    
48.       mm.run()
    
49.     File "/www/server/panel/pyenv/lib/python3.7/site-packages/setuptools/command/egg_info.py", line 541, in run
    
50.       self.add_defaults()
    
51.     File "/www/server/panel/pyenv/lib/python3.7/site-packages/setuptools/command/egg_info.py", line 578, in add_defaults
    
52.       sdist.add_defaults(self)
    
53.     File "/www/server/panel/pyenv/lib/python3.7/distutils/command/sdist.py", line 226, in add_defaults
    
54.       self._add_defaults_python()
    
55.     File "/www/server/panel/pyenv/lib/python3.7/site-packages/setuptools/command/sdist.py", line 113, in _add_defaults_python
    
56.       self._add_data_files(self._safe_data_files(build_py))
    
57.     File "/www/server/panel/pyenv/lib/python3.7/site-packages/setuptools/command/egg_info.py", line 621, in _safe_data_files
    
58.       return build_py.get_data_files_without_manifest()
    
59.     File "/www/server/panel/pyenv/lib/python3.7/distutils/cmd.py", line 103, in __getattr__
    
60.       raise AttributeError(attr)
    
61.   AttributeError: get_data_files_without_manifest
    
62.   ----------------------------------------
    
63. WARNING: Discarding https://files.pythonhosted.org/packages/37/84/5bb86e0a4cda99669ccf0814942889499dc11e3124fd4cc2f4faa447e966/pycryptodome-3.9.6.tar.gz#sha256=bc22ced26ebc46546798fa0141f4418f1db116dec517f0aeaecec87cf7b2416c (from https://pypi.org/simple/pycryptodome/) (requires-python:>=2.6, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*). Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
    
64. ERROR: Could not find a version that satisfies the requirement pycryptodome==3.9.6 (from versions: 3.0rc1, 3.0, 3.1, 3.2, 3.2.1, 3.3, 3.3.1, 3.4, 3.4.3, 3.4.4, 3.4.5, 3.4.6, 3.4.7, 3.4.8, 3.4.9, 3.4.11, 3.5.0, 3.5.1, 3.6.0, 3.6.1, 3.6.3, 3.6.4, 3.6.5, 3.6.6, 3.7.0, 3.7.1, 3.7.2, 3.7.3, 3.8.0, 3.8.1, 3.8.2, 3.9.0, 3.9.1, 3.9.2, 3.9.3, 3.9.4, 3.9.6, 3.9.7, 3.9.8, 3.9.9, 3.10.1, 3.10.3, 3.10.4, 3.11.0)
    
65. ERROR: No matching distribution found for pycryptodome==3.9.6
    

复制代码

1. Requirement already satisfied: cachelib in /www/server/panel/pyenv/lib/python3.7/site-packages (0.4.1)
   
2. WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
   
3. Starting Bt-Panel............failed
   
4. ------------------------------------------------------
   
5. Traceback (most recent call last):
   
6.   File "/www/server/panel/BT-Panel", line 10, in <module>
   
7.     from gevent import monkey
   
8. ModuleNotFoundError: No module named 'gevent'
   
9. ------------------------------------------------------
   
10. Error: BT-Panel service startup failed.
    
11.         done
    
12. Starting Bt-Tasks... failed
    
13. ------------------------------------------------------
    
14. Traceback (most recent call last):
    
15.   File "/www/server/panel/BT-Task", line 13, in <module>
    
16.     import task
    
17.   File "/www/server/panel/task.py", line 19, in <module>
    
18.     from psutil import Process, pids, cpu_count, cpu_percent, net_io_counters, disk_io_counters, virtual_memory
    
19. ModuleNotFoundError: No module named 'psutil'
    
20. ------------------------------------------------------
    
21. Error: BT-Task service startup failed.
    
22. username: iwyxsrzh
    
23. Stopping Bt-Tasks...    done
    
24. Stopping Bt-Panel...    done
    
25. Starting Bt-Panel............failed
    
26. ------------------------------------------------------
    
27. Traceback (most recent call last):
    
28.   File "/www/server/panel/BT-Panel", line 10, in <module>
    
29.     from gevent import monkey
    
30. ModuleNotFoundError: No module named 'gevent'
    
31. Traceback (most recent call last):
    
32.   File "/www/server/panel/BT-Panel", line 10, in <module>
    
33.     from gevent import monkey
    
34. ModuleNotFoundError: No module named 'gevent'
    
35. ------------------------------------------------------
    
36. Error: BT-Panel service startup failed.
    
37.         done
    
38. Starting Bt-Tasks... failed
    
39. ------------------------------------------------------
    
40. Traceback (most recent call last):
    
41.   File "/www/server/panel/BT-Task", line 13, in <module>
    
42.     import task
    
43.   File "/www/server/panel/task.py", line 19, in <module>
    
44.     from psutil import Process, pids, cpu_count, cpu_percent, net_io_counters, disk_io_counters, virtual_memory
    
45. ModuleNotFoundError: No module named 'psutil'
    
46. Traceback (most recent call last):
    
47.   File "/www/server/panel/BT-Task", line 13, in <module>
    
48.     import task
    
49.   File "/www/server/panel/task.py", line 19, in <module>
    
50.     from psutil import Process, pids, cpu_count, cpu_percent, net_io_counters, disk_io_counters, virtual_memory
    
51. ModuleNotFoundError: No module named 'psutil'
    
52. ------------------------------------------------------
    
53. Error: BT-Task service startup failed.
    
54. ===============================================
    
55. EXECUTING
    
56. ===============================================
    
57. Traceback (most recent call last):
    
58.   File "/www/server/panel/BT-Panel", line 10, in <module>
    
59.     from gevent import monkey
    
60. ModuleNotFoundError: No module named 'gevent'
    
61. Traceback (most recent call last):
    
62.   File "/www/server/panel/BT-Panel", line 10, in <module>
    
63.     from gevent import monkey
    
64. ModuleNotFoundError: No module named 'gevent'
    
65. =================================================
    
66. ERROR: The BT-Panel service startup failed.
    

复制代码

sunpma

Sails 发表于 2021-11-4 15:34
修改了，还是不行呢

先安装以下模块再安装BT就行了~~

1. btpip install psutil
   
2. btpip install gevent
   
3. btpip install flask
   
4. btpip install gevent-websocket

复制代码

solo1

我刚刚DD&nbsp;&nbsp;的11&nbsp;&nbsp;安装宝塔失败

主菜单

安装好的也是加载异常，主页软件显示不出来，软件商店显示不出来，可能是DNS炸了

iiii.im

可能是有些依赖包下载不到。哪里的机子

Sails

iiii.im 发表于 2021-11-4 14:10
可能是有些依赖包下载不到。哪里的机子

机器是热乎的甲骨文新加坡 ARM

iiii.im

Sails 发表于 2021-11-4 14:12
机器是热乎的甲骨文新加坡 ARM

换一下dns，另外升级一下机器。应该就是某些依赖拉取不到

Sails

solo1 发表于 2021-11-4 14:08
我刚刚DD  的11  安装宝塔失败

我也是，dd的debian11安装aapanel失败，又dd了debian10，安装aapanel还是失败，一样的报错。

leary

同样的问题，安装也不行。等

solo1

Sails 发表于 2021-11-4 14:14
我也是，dd的debian11安装aapanel失败，又dd了debian10，安装aapanel还是失败，一样的报错。 ...

找一找 arm能用的centos吧